Products
Analysis Results on Sample Dried at 105 Degree Centigrade
PARAMETERS | VALUES |
---|---|
Fe | < % 5 or < % 30 |
Mn | % 36-38 / 38-40 / 40-42 |
SiO2 | < % 30 |
P | < % 0.5 |
S | < % 0.5 |
SHIPMENT | |||
Trial | 500 DMT (Dry Metric Ton) | ||
MOQ | 500 DMT (Dry Metric Ton) | ||
Monthly | 1000 -5000 DMT (Dry Metric Ton) | ||
Delivery | 30-45 days after confirmation of payment |
ANALYSIS RESULTS | |||
BaSO4 | % 92.89 | Mn | % 0.21 |
SrSO4 | % 1.96 | Pb | % 0.15 |
SiO2 | % 2.42 | Zn | % 0.48 |
FeO3 | % 0.89 | Co | % 0.013 |
Ca | % 0.67 | Cu | % 0.016 |
Mg | % 0.19 | Ni | % 0.022 |
SHIPMENT | |||
Trial | 500 tons | ||
MOQ | 1000 tons | ||
Monthly | 3000-5000 tons | ||
Delivery | 30-45 days after confirmation of payment |
ANALYSIS RESULTS | |||
Al2O3 | 55% min, below 53% rejection | ||
SiO2 | 6% max, above 8 % rejection | ||
Fe2O3 | 23% max | ||
Moisture | 5% max | ||
Size | 0-120mm 90% min, above 120mm 10% |
SHIPMENT | |||
Trial | 10000 tons | ||
MOQ | 10000 tons | ||
Monthly | 30000 tons | ||
Delivery | 30-45 days after confirmation of payment |
LEAD
Lead is a soft, malleable poor metal. It is also counted as one of the heavy metals so it has a high density. Lead is used in building construction, lead-acid batteries, bullets and shot, weights, as part of solders, pewters, fusible alloys, and as a radiation shield. Lead is used in applications where its low melting point, ductility and high density are advantageous. The low melting point makes casting of lead easy. Lead is added to brass to reduce machine tool wear and also Lead has many uses in the construction industry too.
SHIPMENT | |
Trial | 500 DMT (Dry Metric Ton) |
MOQ | 500 DMT (Dry Metric Ton) |
Monthly | 1000-5000 (Dry Metric Ton) |
Delivery | 30-45 days after confirmation of payment |
COPPER
Copper is a ductile metal with very high thermal and electrical conductivity. Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. The major applications of copper are in electrical wires (60%), roofing and plumbing (20%) and industrial machinery (15%). Copper is mostly used as a metal, but when a higher hardness is required it is combined with other elements to make an alloy (5% of total use) such as brass and bronze.
SHIPMENT | |
Trial | 500 DMT (Dry Metric Ton) |
MOQ | 500 DMT (Dry Metric Ton) |
Monthly | 1000-5000 (Dry Metric Ton) |
Delivery | 30-45 days after confirmation of payment |
SHIPMENT | |
Trial | 500 DMT (Dry Metric Ton) |
MOQ | 500 DMT (Dry Metric Ton) |
Monthly | 1000-5000 (Dry Metric Ton) |
Delivery | 30-45 days after confirmation of payment |
ZINC
Zinc is most commonly used as an anti-corrosion agent. Galvanization, which is the coating of iron or steel to protect the metals against corrosion, is the most familiar form of using zinc in this way. Also it is used in the production of alloys like brass and bronze and some other miscellaneous products.
SHIPMENT | |
Trial | 500 DMT (Dry Metric Ton) |
MOQ | 500 DMT (Dry Metric Ton) |
Monthly | 1000-5000 (Dry Metric Ton) |
Delivery | 30-45 days after confirmation of payment |
ANALYSIS RESULTS | |||
BaSO4 | % 92.89 | Mn | % 0.21 |
SrSO4 | % 1.96 | Pb | % 0.15 |
SiO2 | % 2.42 | Zn | % 0.48 |
FeO3 | % 0.89 | Co | % 0.013 |
Ca | % 0.67 | Cu | % 0.016 |
Mg | % 0.19 | Ni | % 0.022 |
SHIPMENT | |||
Trial | 500 tons | ||
MOQ | 1000 tons | ||
Monthly | 3000-5000 tons | ||
Delivery | 30-45 days after confirmation of payment |
ANALYSIS RESULTS | |||
Al2O3 | 55% min, below 53% rejection | ||
SiO2 | 6% max, above 8 % rejection | ||
Fe2O3 | 23% max | ||
Moisture | 5% max | ||
Size | 0-120mm 90% min, above 120mm 10% |
SHIPMENT | |||
Trial | 10000 tons | ||
MOQ | 10000 tons | ||
Monthly | 30000 tons | ||
Delivery | 30-45 days after confirmation of payment |